Amerimix
EZ Scaffold Corp.
EZG Manufacturing
Hydro Mobile, Inc.
Loot
Non-Stop Scaffolding
PROSOCO, Inc.
SOLA/Keson
SPEC MIX LLC
Stabila
Westlake Royal Stone Solutions
Find-a-Contractor Masonry Buyer's Guide
DX490LC and DX530 Excavators
DX490LC and DX530 Excavators
June 29, 2013 7:00 AM CDT

New masonry products for June 2013

Excavators, anchor systems and more

By

DX490LC and DX530 Excavators

Doosan
West Fargo, N.D.

The Doosan DX490LC-3 and DX530LC-3 excavators are equipped with upgrades that provide power and performance in road building, site development, oil and gas pipeline development and other construction applications. These machines replace the DX480 and DX520 respectively, and have been designed with improvements that include increased engine horsepower and lift capacity, improved bucket digging force, enhanced cooling capabilities and better fuel efficiency. The excavators are powered by a six-cylinder, 389 horsepower, water-cooled diesel engine that optimized for use with a cooled exhaust gas recirculation system, a diesel oxidation catalyst and a diesel particulate filter.

www.doosanequipment.com

Paver Edging Spikes

Edgetite
Mechanicsburg, Pa.

Paver Edging Spikes
Paver Edging Spikes
Edgetite Products Inc.’s paver edging spike makes paver installations stronger. Edgetite spikes help solve the separation problem that can occur when installing paver edging with common spikes. They were created when a landscape/hardscape contractor continually encountered this problem while installing paver edging. Edgetite spikes are unique, because of the patent-pending, angled-tip design. As an Edgetite spike is hammered into the compacted base, the angled tip deflects away from the installation as the head pushes the edge restraint tightly against the brick.

www.edgetite.com

HIT- HY 200 Adhesive Anchor System

Hilti
Tulsa, Okla.

HIT- HY 200 Adhesive Anchor System
HIT- HY 200 Adhesive Anchor System
The Hilti HIT-HY 200 Adhesive Anchor System has Hilti Safe Set Technology that eliminates this factor almost entirely and improves reliability and productivity, because no manual hole cleaning is required to obtain optimum performance. For holes that clean themselves, use the new Hilti TE-CD and TE-YD Hollow Drill Bits in conjunction with the Hilti VC 20/40 vacuum. Dust is removed by the Hilti VC 20/40 Vacuum System, while drilling is in progress for faster drilling and a virtually dustless working environment. This installation is only allowed with Hilti HIT-HY 200.

www.us.hilti.com

Patching Compound Solution for Surface Preparation

Parex USA Inc.
Anaheim, Calif.

Patching Compound Solution for Surface Preparation
Patching Compound Solution for Surface Preparation
Parex USA Inc. introduces a patching compound solution to the Merkrete Surface Preparation portfolio. Merkrete Pro Patch XF is a fast-setting, Portland cement-based skim coating compound for leveling embossed floors and for finishing and smoothing most interior subfloors. Pro Patch XF is specifically formulated to smooth and finish substrates prior to the installation of vinyl sheet goods, vinyl composition tile, wood floors, carpet and glued-down installations. It is also ideal for ceramic tile and stone tiles.

www.parexusa.com

Line-X Protective Coatings Partners With Under Armour

LINE-X Protective Coatings
Huntsville, Ala.

Line-X Protective Coatings Partners With Under Armour
Line-X Protective Coatings Partners With Under Armour
LINE-X Protective Coatings has partnered with Under Armour to create a water shoe. The “Water Spider” is a high-performance water shoe designed for great ventilation and water expulsion through a tough LINE-X-coated mesh. The coating is completely waterproof, color stable and durable. This defining partnership between Under Armour and LINE-X was vital in the design and creation of this product. The Water Spider is designed with quick lock lacing, lightweight cushioning and support, a full-drainage polyurethane footbed and high traction, non-slip outsoles.

www.LINE-X.com

Originally published in Masonry magazine.


About the Author

Masonry, the official publication of the Mason Contractors Association of America, covers every aspect of the mason contractor profession - equipment and techniques, building codes and standards, business planning, promoting your business, legal issues and more. Read or subscribe to Masonry magazine at www.masonrymagazine.com.

 

Related Articles

More Masonry Headlines

“I recommend that all mason contractors become a member of the MCAA.”

Bobby Gladu
Artisan Masonry, Inc.
MCAA member since 2017

Learn More